Programming Key; Locking Your Telephone - Siemens Profiset 30isdn Operating Instructions Manual

Locking your telephone

0, 1 or 2
Convenient and secure telephone communication
You can lock your Profiset 30isdn against possible unau-
thorized use:
Total lock, only allows you to dial a preset direct
station selection number (Programming direct station
selection:
Incoming calls are permitted.
Partial lock, only allows you to dial with the Destina-
tion dialling keys (Programming the destination
dialling keys:
Destination dialling keys:
dialling keys (Programming the Speed dialling keys:
dialling key:
Incoming calls are permitted.
a
Handset is on-hook.
s
Press the Locking key.
The symbol J appears on the display.
T
Enter the password.
Enter the code "1" for total lock, "2" for partial lock or
"0" for deactivating the lock.
s or S
Press the Locking key or Programming key.
The telephone is locked or the lock is deactivated.
An activated lock (total or partial lock) is indicated via the
symbol J on the display.
page 26).
page 25; Dialling call numbers using
page 25; Dialling call numbers using the Speed
page 11).
The telephone can only be locked if the pass-
word is not set to 0000 (Defining the password:
page 28).
If the password is set to 0000 and the telephone
was previously locked the lock is deactivated
then.
page 10) and the Speed
19