I Can't Receive A Radio Station; I'm Getting A Lot Of Static/Interference; When I Press A Key To Tune To A Preset Station, The Receiver Does Not Respond - Kenwood KRF-V9993D How To Operate
Digital audio/video receiver
Hide thumbs
Also See for KRF-V9993D:
- User manual (114 pages) ,
- Connection manual (180 pages) ,
- Connection and setup manual (62 pages)
Table of Contents
Advertisement
Receiver/Tuner
I can't receive a radio station
Check that:
•
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
•
The broadcast band is correct. See "Tuner" on page 52 of this manual.
•
The tuner is set to the correct frequency. See "Tuner" on page 52 of
this manual.
I'm getting a lot of static/interference
•
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
•
Adjust the antenna for best reception.
•
If you live in an area with weak FM signals, consider a rooftop or an
amplified FM antenna (available at any home electronics store).
When I press a key to tune to a preset station, the receiver does not
respond
Check whether:
•
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver's memory. See "My re-
ceiver won't turn on and the STANDBY indicator is flashing" on
page 99 of this manual.
•
The Tuner input is selected. See "Tuner" on page 52 of this manual.
103
Advertisement
Table of Contents
