@1
@4
@0
@2
@3
1. When using the AK device, set whether to use the AK device after confirming how to select the
auto-lifter function.
(Refer to "Instruction Manual for SC-910".)
2. be sure to securely insert the respective connectors after checking the inserting directions
since all connectors have the inserting directions.
(When using a type with lock, insert the connectors until they go to the lock.)
The sewing machine is not actuated unless the connectors are inserted properly.
In addition, not only the problem of error warning or the like occurs, but also the sewing
machine and the control box are damaged.
(7) Connecting for IP-110 panel
1
!1
8
6
@5
3
2
4
– 7–
2) Connect6Pconnector!1 c omingfromthe
machineheadtoconnector@1 (CN39).
3) Connect4Pconnector 8 comingfromthe
machineheadtoconnector@2 (CN34).
4) Connect 4P connector 6 coming from the
operationdisplaypaneltoconnector@3 (CN32).
5) I n s e r t K T- 0 ( E P F ) r e l a y c o n n e c t o r @ 0 t o
connector@4 (CN4)andconnector@5 (CN42).
When the connectors are not properly
connected, the p.c.b. does not work
normally.
) TheconnectorforconnectingIP-0isprepared.
When connecting, insert the connector until it is
lockedto 1 (CN34).
2) After inserting the connector, put all cords
together with cable clip band 2 located on the
sideofthebox.
At this time, bundle the connectors which are
arranged above the wire saddle to wire saddle
3 andthosewhicharearrangedbelowthewire
saddletowiresaddle 4 .