Table of Contents
Advertisement
9. REMOVING THE HEAD FIXING PLATE
❷
❶
10. INSTALLING OPERATION PANEL IP-420
As shown in the figure above, open the lid on the right-hand section B of IP-420 and connect the connector
which is fixed with tape to the right-hand top surface A of the table.
To prevent malfunction due to static electricity, install operation panel IP-420 on the panel base
to use and do not change the position of the panel base.
A
− 10 −
Remove fixing screws ❷ of head fixing plate ❶ .
Be sure to fix the machine and the frame
when performing re-transportation.
B
Tape
Connector
Advertisement
Chapters
Table of Contents
