5. HOW TO USE THE OPERATION PANEL
(1) Names and functions of each components
!6
!8
!7
1 Re-sewingswitch
2 Needleup/downcompensatingswitch
3 Screenchangeoverswitch
4 With/withoutreversefeedstitch
atsewingstartswitch
5 With/withoutreversefeedstitch
atsewingendswitch
6 Resetswitch
7 Teachingswitch
1 Re-sewingswitch
2 Needleup/down
compensatingswitch
3 Screenchangeover
switch
4 With/without reverse
feed stitch at sewing
startswitch
5 With/withoutreverse
feedstitchatsewing
endswitch
6 Resetswitch
1
3
4
2
5
8 Informationswitch
9 Materialedgesensorswitch
!0 One-shotstitchingswitch
!1 With/withoutautomaticthread
trimmerswitch
!2 Threadtrimmingprohibitingswitch
!3 Countervaluesettingswitch
!4 Max.speedlimitationvariable
resistor
This switch is used to continue sewing from the step on the way
afterreplacingbobbinthreadwhenbobbinthreadhasrunoutduring
programstitchingstep.
Thisistheswitchtoperformneedleup/downcompensatingstitching.
(Needleup/downcompensatingstitchingandonestitchcompensating
stitchingcanbechangedoverwithfunctionsettingNo.22.)
Thisistheswitchtochangeoverthescreen.
This is the switch to turn ON/OFF automatic reverse feed stitch at
sewingstart.
* T his switch cannot be used with the sewing machine which is not
providedwithautomaticreversefeedstitchingdevice.
This is the switch to turn ON/OFF automatic reverse feed stitch at
sewingend.
*This switch cannot be used with the sewing machine which is not
providedwithautomaticreversefeedstitchingdevice.
This is the switch to make the value of bobbin thread counter or
sewingcounterthesetvalue.
!0
!4
!1
–4–
!5
9
6
!2
8
!5 Powerdisplaylamp
!6 Mediacover
!7 Mediaslot
(Mediainsertingopening)
!8 CompactFlash(TM)
Optional:
( )
PartNo.4000000
!3
7