(6) Attaching the circuit board
Inserting position
2
2
1
Rear side
3
5
) Openthefrontcoveraccordingtotheinstructions
given in the Instruction Manual for the control
boxmainunit.
2) Insertstud 2 suppliedwiththeunitas
accessoriestoKT-0(EPF)p.c.b.A(asm.) 1 .
be careful of the inserting direction.
3) InsertKT-0(EPF)p.c.b.A(asm.) 1 toconnector
CN47 3 ofthemainunitasillustrated.
1. Insert KT-01(EPF) p.c.b. A (asm.) from
2. Do not forcibly press the circuit board.
4) Securely fix KT-0(EPF) p.c.b.A (asm.) 4 to
the control box main unit using three screws 5
suppliedwiththeunitasaccessories.
4
– 5–
the oblique lower section, check the
inserting position and insert it until
"click" sounds since connector CN47
3 is hidden by the cover located in
the upper section of the control box
main unit.