JUKI IP-410 Instruction Manual page 44

D
E
3 Move the needle position.
Press MOVE key
and the needle position moves in the specified direction.
4 Input the coordinate.
When the needle position has moved to the specified position,
and DECIDING POINT button
s nputted as the shape pont (passng pont).
F
It s possble to nput by repeatng the steps of 3 and 4 as
well.
5 End setting of the linear reverse sewing.
When ENTER button
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
Settng procedure of the reverse sewngs of other shapes s
the same as that of the lnear reverse sewng.
– 40 –
D n the coordnate nput screen,
E s pressed, the poston
F s pressed, the set data s