JUKI IP-410 Instruction Manual page 18

1
C
D
F
Move the needle poston up to 1 usng MOVE key
C n the jump feed poston specfyng screen, press
DECIDING POINT button
E .
E
At this time, the presser moves. So, be careful.
2 Input of the linear ordinary sewing
Press CODE LIST button
dsplay the code lst screen.
Select the lnear ordnary sewng (functon code 023) n the
functon code lst screen, and press ENTER button
G
Press STITCH LENGTH SETTING button
lnear ordnary sewng settng screen to dsplay the sttch
length settng screen.
Press TEN key n the order of "3" and "0", and press ENTER
button n the sttch length settng screen.
H
Return to the lnear ordnary sewng settng screen, confrm
that the dsplay of sttch length settng button s "3.0 mm", and
press ENTER button
– 14 –
D , and press ENTER button
F n the standard screen to
H .
.
G n the