PoNt SewNg (021) - JUKI IP-410 Instruction Manual

(6) Point sewing (021)
Ths functon s used when drect nputtng the needle entry pont one sttch by one sttch.
B
D
E
1 Display the point sewing setting screen.
Press POINT SEWING button
or select and execute POINT SEWING (functon code 021)
n the code lst screen, the pont sewng settng
screen s dsplayed.
2 Perform setting of the point sewing.
The set value of present sewng speed s dsplayed at
C
SEWING PEED INPUT button
sewng settng screen.
When SEWING SPEED INPUT button s pressed, the sewng
speed nput screen s dsplayed. Settng procedure of the
sewng speed s the same as that of the lnear ordnary
sewng.
After settng, or when t s not necessary to change, press
ENTER button
dsplayed.
3 Move the needle position.
Press MOVE key
and the needle position moves in the specified direction.
4 Input the coordinate.
When the needle position has moved to the specified position,
press DECIDING POINT button
F
nputted as the shape pont.
It s possble to nput by repeatng the operaton of steps 3
and 4 as well.
5 End setting of the point sewing.
When ENTER button
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
– 30 –
n the standard screen,
B n the pont
C , and the coordnate nput screen s
D n the coordnate nput screen,
E , and the poston s
F s pressed, the set data s