JUKI IP-410 Instruction Manual page 105

List of the display of contents in the contents of pattern display screen
Contents
No.
Kind of needle entry
1
of the current needle
position is displayed.
Kind of element of
2
the current needle
position is displayed.
In case of the
mechanical control
command, kind
of command is
displayed.
Absolute coordinates
3
of the current needle
position is displayed.
Relative coordinates
4
of the current needle
position is displayed.
Pitch of element
5
including the current
needle position is
displayed.
Sewing speed or
6
jump feed speed of
the current needle
position is displayed.
Thread tension
7
(absolute value and
relative value) of
the current needle
position is displayed.
Intermediate presser
8
height of the current
needle position is
displayed.
Head of Midway of
pattern pattern
Jump feed Point
Machine control
command
(Example :
Thread tension)
Sewing Jump feed
speed speed
Actual sewing machine motion becomes the value of ABS.
"–" (minus) may be displayed according to the input order of
reference value and set value. However, motion with the sewing
machine becomes "0".
Actual sewing machine motion becomes the value of ABS.
"–" (minus) may be displayed according to the input order of
reference value and set value. However, motion with the sewing
machine becomes "0".
* This is not displayed for the LK-1900A series.
– 101 –
Display
Top End of
element
Polygonal Arc
End of
pattern
Circle Spline