JUKI IP-410 Instruction Manual page 12

Button Name of button
PRESENT NEEDLE
Q
POSITION
INFORMATION dsplay
1
Item
Absolute coordnate
1
Relatve coordnate
2
Speed
3
Ptch
4
Knd of element
5
Knd of needle entry
6
The secton of present needle poston nformaton dsplay can dsplay the comment of pattern by the dsplay settng
("14. PERFORMING SETTING OF DISPLAY"
Part where nformaton on the present needle poston s dsplayed.
Contents of the dsplay s shown below.
2
Absolute coordnate from the orgn of the present needle poston s dsplayed.
Relatve coordnate of the present needle poston s dsplayed.
Sewng speed or jump feed speed of the present pont s dsplayed.
Sttch length of the present element s dsplayed. (When performng readng after
enlargng/reducng, the value before enlargng/reducng s dsplayed.)
Knd of element of present element s dsplayed. In case of sewng data, pctograph
n accordance wth the knd of element (jump feed
, etc.) s dsplayed. In case of machne control command, knd of machne
control command (thread trmmng
(For the other pctographs, refer to
Knd regardng needle entry poston s dsplayed.
Top of pattern
Mdway of
element
Top
End of element End poston of element s dsplayed.
End of pattern
p.102) as well.
– 8 –
Description
3
4
Description
, broken lne
, etc.) s dsplayed wth pctograph.
"19. FUNCTION CODE LIST"
Top poston (orgn) of pattern s dsplayed.
Pont of mdway n element (not the top nor end of
element) s dsplayed.
Top of broken lne s dsplayed.
The last poston of pattern s dsplayed.
5 6
, splne
p.114.)