JUKI IP-410 Instruction Manual page 22

H
J
3 Deletion of point
Move the needle poston up to the poston of E n the
standard screen usng FEED FORWARD/BACKWARD buttons
E
A .
Select ABSOLUTE POINT DELETION (functon code 074)
from the functon code lst to dsplay the range
specfyng screen.
F In case of deletng plural needle entry ponts, press FEED
G
FORWARD button
specify the section of the points to be deleted. Here, specify
pont E only, and press ENTER button
It is confirmed that point E has been deleted as shown n the
figure below.
4 Addition of point
Move the needle poston up to the poston of H n the
standard screen usng FEED FORWARD/BACKWARD buttons
A , and select ABSOLUTE POINT ADDITION
I
(functon code 076)
Move the needle poston up to the addng pont I n the
poston specfyng screen usng MOVE key
K
press ENTER button
The needle entry point is added as shown in the figure below.
H
– 18 –
F to move the needle poston, and
G .
.
K .
I
J , and