Optional; Table Of Needle Hole Guide; Silicon Oil Tank - JUKI AMS-224EN/IP-420 Instruction Manual

2. oPtIoNaL

2-1. table of Needle hole guide

Needle used
Sze Part No.
#09 to # B24262000C
# to #4 B24262000A
#4 to #8 * B24262000B

B24262000D
#8 to #2
B24262000F
#22 to #25 * B24262000G
2
#8 to #25 B24262000H
Needle used
Sze
#09 to #
B6020D0E (OP)
# to #4 40023632 (H type)
B6020D0FA (OP)
#4 to #8 *

#8 to #2 B6020D0BA (G type)
#22 to #25 *
2
B6020D0CA (OP)
#8 to #25
* : H-type nstalled needle (DP X 7 #8)

* : G-type nstalled needle (DP x 7 #23)
2
・Lght-weght to medum-weght materals : Applcable thread No. #80 to #20
・Medum-weght to heavy-weght materals : Applcable thread No. #50 to #02
・Heavy-weght to extra-heavy weght materals : Applcable thread No. #20 to #02
・(OP) means the optonal.

2-2. Silicon oil tank

WarNING :
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
2
5
3
1
4
Needle hole dameter
ø .6
ø .6
ø 2.0
ø 2.4
ø 3.0
ø 3.0 (wth a counterbore)
ø 3.0 (eccentrc hole)
Intermedate presser
Part No. Sze (øA × øB × H × L)
ø .6 × ø 2.6 × 5.7 × 37.0
ø 2.2 × ø 3.6 × 5.7 × 38.5
ø 2.2 × ø 3.6 × 8.7 × 4.5
ø 2.7 × ø 4. × 5.7 × 38.5
ø 3.5 × ø 5.5 × 5.7 × 38.5
6
Needle hole gude
For knts (OP)
For lght-weght to medum-weght materals
For medum-weght to heavy-weght materals (H type)
For heavy-weght materals (OP)
For heavy-weght materals (G type)
For extra heavy-weght materals (OP)
(suppled for G type)
For heavy-weght materals to prevent skp-sttchng
(OP)
The G type model s provded wth slcon ol tank
asm. (4009730) as an accessory.
The slcon ol tank asm. should be fxed on the
sewng machne by means of setscrews 1 (SM-
404055SP) and 2 (SM4042055SP) suppled
wth the unt. To tghten setscrew 2 , tghten t
together wth thread gude collar 3 (3508),
slcon ol tank thread gude 4 (400044) and
thread gude setscrew washer 5 (WP050046SC).
Slcon ol tank thread gude 4 (400044) should
be placed so that t s n parallel wth slcon ol
tank base 6 (40096982).
If the thread twists hard on silicon
oil tank base 6 (40096982), reverse
the direction of winding the thread.
– 5 –
Applcaton
ø a
H
ø B
L