Installing The Sewing Machine Main Unit; Tilting The Sewing Machine Head - JUKI AMB-289 Instruction Manual

(4) Installing the sewing machine main unit

WARNING :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two persons
or more when the machine is moved.
2

(5) Tilting the sewing machine head

WARNING :
When tilting/raising the sewing machine head, perform the work so as not to allow your fingers to be
caught in the machine. In addition, to avoid possible accidents caused by abrupt start of the machine,
turn OFF the power to the machine before starting the work.
1
!– 8
Adjust the sewing machine head to the hole of arm
stay, and insert shaft 1 . Fix shaft 1 with screws
2 in the state that the end faces of shaft 1 are
protruded on the both sides.
Be careful that wiring and air pipe
coming out from the bottom face of
the sewing machine are not crushed.
When tilting the sewing machine head, tilt quietly
the sewing machine until head support bar
comes in contact with it.
1. Make sure that sewing machine
head support bar
the table before tilting the sewing
machine.
2. To protect fall-down, be sure to
tilt the sewing machine in a level
place.
3. Keep the table in the state that
anything is not put on the top
surface of table
is placed on