Installing The Air Regulator - JUKI AMB-289 Instruction Manual

(8) Installing the air regulator

!1
!0
1) Install filter installing plate 1 on the right side of the stand side support with screw 3.
2) Fix air regulator 2 on filter installing plate 1 with screw 4.
3) Fix elbow union 5 on the right section of air regulator 2.
4) Insert air hose 6 into elbow union 5.
5) Insert reducing union T 7 into the top end of the air hose, and insert stop plug 8 into the hole of ø6.
Use the branch section (ø6) of reducing union T 7 when using the air gun.
Air gun set (G57602540A0) is available as optional.
Reference
6) Insert air tube 9 coming from the main unit of machine head into reducing union T 7.
7) Insert pressure sensor relay cord !0 into connector !1 of air regulator 2.
8) Winding pressure sensor relay cord !0 around air tube 9, insert it into the control box (CN41).
9) Supply air, and adjust the air pressure to 0.5 Mpa.
2
5
6
7
!– 10
3
1
4
8
9