Assigning Stack Member Information; Assigning A Stack Member Number; Setting The Stack Member Priority Value - Cisco Catalyst 3120 Software Manual

Chapter 5 Managing Switch Stacks
WARNING: not appear elsewhere in this network domain. If it does,
WARNING: user traffic may be blackholed.
Switch(config)# end
Switch# show switch
Switch/Stack Mac Address : 0016.4727.a900
Mac persistency wait time: 7 mins
Switch#
----------------------------------------------------------
*1

Assigning Stack Member Information

These sections describe how to assign stack member information:
•
•
•

Assigning a Stack Member Number

This task is available only from the stack master.
Note
Beginning in privileged EXEC mode, follow these steps to assign a member number to a stack member.
This procedure is optional.
Command
Step 1
configure terminal
Step 2 switch current-stack-member-number
renumber new-stack-member-number
Step 3 end
Step 4 reload slot stack-member-number
Step 5
show switch
Step 6 copy running-config startup-config

Setting the Stack Member Priority Value

This task is available only from the stack master.
Note
OL-12247-01
Role Mac Address
Master 0016.4727.a900
Assigning a Stack Member Number, page 5-23
Setting the Stack Member Priority Value, page 5-23
Provisioning a New Member for a Switch Stack, page 5-24
H/W Current
Priority Version
1 0
(optional)
Purpose
Enter global configuration mode.
Specify the current stack member number and the new stack member
number for the stack member. The range is 1 to 9.
You can display the current stack member number by using the show
switch user EXEC command.
Return to privileged EXEC mode.
Reset the stack member.
Verify the stack member number.
Save your entries in the configuration file.
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
Configuring the Switch Stack
State
Ready
(optional)
(optional)
5-23