Assigning A Stack Member Number - Cisco Catalyst 3560CX Series Manual

Assigning a Stack Member Number

Command or Action
Step 4 end
Example:
Device(config)# end
Step 5
copy running-config startup-config
Example:
Device# copy running-config startup-config
What to do next
Use the no stack-mac persistent timer global configuration command to disable the persistent MAC address
feature.
Assigning a Stack Member Number
This optional task is available only from the active stack.
Follow these steps to assign a member number to a stack member:
SUMMARY STEPS
1. enable
2. configure terminal
3. switch current-stack-member-number renumber new-stack-member-number
4. end
5. reload slot stack-member-number
6. show switch
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Managing Switch Stacks
14
Purpose
you enter the no stack-mac persistent timer
command.
If you enter the no stack-mac persistent timer
Note
command after a new active switch takes over,
before the time expires, the switch stack moves
to the current active switch MAC address.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Managing Switch Stacks