Cisco Catalyst 3120 Software Manual page 125

Chapter 5 Managing Switch Stacks
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting
cbs31x0-universal-mz.122-0.0.313.EX/cbs31x0-universal-mz.122-40.EX (4945851 bytes)
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting
cbs31x0-universal-mz.122-40.EX/info (450 bytes)
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting info (104 bytes)
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Installing
(renaming):`flash1:update/cbs31x0-universal-mz.122-0.0.313.EX' ->
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
`flash1:cbs31x0-universal-mz.122-40.EX'
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:New software image installed in
flash1:cbs31x0-i5-mz.122-40.EX
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Removing old
image:flash1:cbs31x0-universal-mz.122-40.EX
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:All software images installed.
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Requested system reload in progress...
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Software successfully copied to
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:system(s) 1
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Done copying software
*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Reloading system(s) 1
This example shows that the switch stack detected a new switch that is running a different minor version
number than the switch stack. Auto-copy starts but cannot find software in the switch stack to copy to
the VM-mode switch to make it compatible with the switch stack. The auto-advise process starts and
recommends that you download a tar file from the network to the switch in VM mode:
*Mar
state UP
*Mar
(VERSION_MISMATCH)
stack_2#
*Mar
initiated for switch number(s) 1
*Mar
*Mar
*Mar
*Mar
*Mar
initiated for switch number(s) 1
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
*Mar
/overwrite /dest 1 flash1:cbs31x0-universal-mz.122-40.EX.tar
*Mar
For information about using the archive download-sw privileged EXEC command, see the
with Software Images" section on page
OL-12247-01
1 00:01:11.319:%STACKMGR-6-STACK_LINK_CHANGE:Stack Port 2 Switch 2 has changed to
1 00:01:15.547:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW_INITIATED:Auto-copy-software process
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:Searching for stack member to act
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:as software donor...
1 00:03:15.554:%IMAGEMGR-6-AUTO_COPY_SW:Software was not copied
1 00:03:15.562:%IMAGEMGR-6-AUTO_ADVISE_SW_INITIATED:Auto-advise-software process
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:Systems with incompatible software
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:have been added to the stack.
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:storage devices on all of the stack
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:members have been scanned, and it has
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:been determined that the stack can be
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:repaired by issuing the following
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:command(s):
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
1 00:04:22.537:%IMAGEMGR-6-AUTO_ADVISE_SW:
archive download-sw /force-reload
B-23.
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
Understanding Switch Stacks
The
"Working
5-15