Table of Contents
Advertisement
nld Options
-rename
Changes the name of an externally visible procedure or data item.
-rename old-name new-name
old-name
is the name of the procedure or data item to rename.
new-name
is the new name to give the procedure or data item.
Existing references to the current name become unresolved references. Thus, another
procedure or data item named old-name can be linked and existing code will use this
version instead of the original (now renamed) version. For example, procedure A calls
procedure B. The operation -rename B C renames procedure B to procedure C.
Procedure A now has an unresolved reference. A new version of procedure B can be
linked in. The new version of procedure B can call the original procedure by calling
procedure C.
Use this option to replace procedures, such as PROCESS_LAUNCH_, with your own
version of PROCESS_LAUNCH_.
-s
Removes symbol information used for linking and symbolic debugging from the
loadfile.
-s
A file stripped of all symbol information cannot be symbolically debugged with the
Inspect symbolic debugger or linked again by nld.
You can use -s only when creating a loadfile. If you specify both
-s, -s is ignored. To strip all symbol information from an existing loadfile, use
page 3-16. You can strip the symbol information used for symbolic debugging with
on page 3-17.
nld and noft Manual—520384-003
3- 12
-rename
-r
on page 3-11 and
-strip
on
-x
Advertisement
Table of Contents
