Table of Contents
Advertisement
nld Diagnostic Messages
**** WARNING **** [10031]:
One or more input object files have FLOATTYPE attribute
IEEE_FLOAT but the -set FLOATTYPE flag specifies
'attribute-value'.
See
-set
on page 3-13.
**** WARNING **** [10032]:
One or more input object files have FLOATTYPE attribute
TANDEM_FLOAT but the -set FLOATTYPE flag specifies
'attribute-value'.
See
-set
on page 3-13.
**** WARNING **** [10034]:
Object files with inconsistent FLOATTYPE attributes (both
IEEE_FLOAT and TANDEM_FLOAT) have been linked together with
an explicit -set FLOATTYPE flag of 'attribute-value'.
See
-set
on page 3-13.
**** WARNING **** [10035]:
Resident version of symbol name in object file filename-1
used in lieu of non-resident version from object file
filename-2.
**** WARNING **** [10036]:
The symbol 'name' (in object file 'filename-1') was
previously resolved to SRL 'filename-2' (object file name
'filename-3').
(object file name 'filename-5'). This is a warning as the
wrong SRL may have been selected.
**** WARNING **** [10037]:
The symbol 'name' was previously exported in SRL 'filename-1'
(object file name 'filename-2').
**** WARNING **** [10038]:
The file named 'filename' may have been corrupted from a bad
string; GINFO_unres_site.instr=address. Strongly recommend
rebuilding the file.
This may result in incorrect behavior.
This may result in incorrect behavior.
It could also be resolved to SRL 'filename-4'
nld and noft Manual—520384-003
10 -75
Warnings
Advertisement
Table of Contents
