HP nld Manual page 74

nld Options
Table 3-2. Descriptions of Run-Time Attributes (page 2 of 2)
attribute-name
HIGHREQUESTER
HIGHREQUESTERS
HIGHREQUESTOR
HIGHREQUESTORS
INSPECT
LIBNAME
MAINSTACK_MAX
RUNNAMED
PFS
PFS_SIZE
PROCESS_SUBTYPE
SUBTYPE
SAVEABEND
SPACE_GUARANTEE
SYSTYPE
1. The fact that nld allows you to use these numbers to build a program does not mean that the program will
run. System memory configuration sizes and setting might prevent the program from running if very large values
have been set.
attribute-value
ON
OFF
ON
OFF
filename
Number in the range
from 0 through
2,147,483,647
(0x7FFFFFFF).*
ON
OFF
Number in the range
from 0 through
2,147,483,647
(0x7FFFFFFF).*
Number in the range
from 0 through
2,147,483,647
(0x7FFFFFFF).*
ON
OFF
Number in the range
from 0 through
2,147,483,647
(0x7FFFFFFF).*
OSS
GUARDIAN
nld and noft Manual—520384-003
3- 14
Description
Specifies whether an object file can
support high process identification
number (PIN) requesters.
Specifies whether the Inspect
program is chosen for debugging
when you execute the target file.
Associates a TNS/R native user
library with a native program file.
Sets the maximum size of the main
stack.
Specifies whether an object file runs
as a named process, even if no RUN
command named parameter is
specified.
Specifies the byte size of the
process file segment. This value is
insignificant as of RVU G06.
Sets the process subtype for the
output object file.
Specifies whether or not to create a
save file if the process terminates
abnormally during execution.
Sets the space size.
Specifies whether the object file is to
run as an OSS or Guardian process.
Setting this attribute to OSS also sets
the -ansistreams flag when the
-set option is used but not when
the -change option is used.
-set