Table of Contents
Advertisement
ar Diagnostic Messages
no position operand specified.
Cause. A positional option must be followed by a position operand preceding the
name of the archive.
Recovery. Reenter the command correctly.
no archive members specified.
Cause. An ar command with the operational option specified requires file-member
operands.
Recovery. Reenter the command correctly.
no archive specified.
An archive file is not specified in the command. Usually this indicates that either no
operand or one operand (when a position operand is required) is specified in the
command. Reenter the command with the correct number of operands.
one of the options -dmpqrtx is required.
Cause. One of the listed options is required.
Recovery. Reenter the command correctly.
only one of -a and -[bi] options allowed.
Cause. Only one positional option is allowed in an ar command.
Recovery. Reenter the command correctly.
posname: archive member not found.
Cause. The specified position operand is not in the archive. The -t option can be
used to find out what members exist in the archive.
Recovery. Reenter the command with correct member names as the position
operand.
nld and noft Manual—520384-003
12- 6
Advertisement
Table of Contents
