HP nld Manual page 191

nld Diagnostic Messages
**** ERROR **** [1111]:
Two -import flags for the symbol named 'name' specified
different SRL names.
See -import on page 3-6.
**** ERROR **** [1112]:
You are trying to build a new version of an SRL with the
-prev flag, and there is now a procedure named %n.
of this name was also exported in the previous version of the
SRL, but in the previous version this was not the name of a
procedure.
This is an internal error. Please contact your service provider.
**** ERROR **** [1113]:
You are trying to build a new version of an SRL with the
-prev flag, and there is now an ordinary data item named %n.
A symbol of this name was also exported in the previous
version of the SRL, but in the previous version this was not
the name of an ordinary data item.
considered an error.
This is an internal error. Please contact your service provider.
**** ERROR **** [1114]:
You are trying to build an SRL, and the actual size of the
segment-ID segment is number-1 bytes, which is larger than
the specified maximum size of number-2 bytes.
**** ERROR **** [1115]:
A -srl_ref flag was the last item found in the command stream
or is followed by a '-'.
specified for the -srl_ref flag.
This is an internal error. Please contact your service provider.
This incompatibility is considered an error.
A <name> attribute must be
nld and noft Manual—520384-003
This incompatibility is
10 -31
Fatal Errors
A symbol