Table of Contents
Advertisement
nld Diagnostic Messages
**** ERROR **** [1063]:
An -srl_name flag was found in the command stream, but an SRL
name must be specified for the -srl_name flag, and the next
item in the command stream begins instead with a hyphen.
This is an internal error. Please contact your service provider.
**** ERROR **** [1064]:
An -srl_fixup flag was found at the end of the command
stream, but a filename must be specified for the -srl_fixup
flag.
This is an internal error. Please contact your service provider.
**** ERROR **** [1065]:
An -srl_fixup flag was found in the command stream, but a
filename must be specified for the -srl_fixup flag, and the
next item in the command stream begins instead with a hyphen.
This is an internal error. Please contact your service provider.
**** ERROR **** [1066]:
A -set flag was the last item found in the command stream,
but an attribute and a value must be specified for the -set
flag.
See
-set
on page 3-13.
**** ERROR **** [1067]:
A -set flag with an attribute name was found at the end of
the command stream, but a value must also be specified for
the -set flag.
See
-set
on page 3-13.
**** ERROR **** [1068]:
A -t flag was the last item found in the command stream, but
a hexadecimal value must be specified for the -ul flag.
This is an internal error. Please contact your service provider.
nld and noft Manual—520384-003
10 -23
Fatal Errors
Advertisement
Table of Contents
