Dealer Mode - Sanyo LCD-32K40 Owner's Manual

DEALER MODE

AC POWER MODE
You can set "STAND", "ON" or "LAST" in AC POWER MODE.
Use this feature to set TV condition when AC cord plug-in.
● STAND
- When AC cord plug-in, LCD TV always STAND-BY.
● ON
- When AC cord plug-in, LCD TV always ON.
● LAST
- When AC cord plug-in, the LCD TV will depend on last TV
condition. (ON or Stand-by)
START VOLUME LEVEL
You can select "OFF" or "1-100" in START VOLUME LEVEL.
Use this feature to set volume bar level position every time
TV turned on.
MUSIC MODE SETUP
MUSIC mode is used to block picture on channel program.
Use this feature to set Music Mode condition in set 5 Position
Channel.
1
Press and hold Menu button on Side Controls, and press
INFO button on remote control to display Dealer mode menu.
Press POINT ▲▼ buttons to select MUSIC MODE SETUP.
2
Press POINT ◄► buttons to enter into MUSIC MODE
SETUP menu.
3
Press POINT ▲▼ buttons to select the item desired.
4
Press POINT ◄► buttons to enter the item selected.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait to exit menu operation.
Note:
When the channel set with Music mode is selected, Eco mode is ON, and
press ECO button,screen display ECO ON.
RESET
This function returns all setting values to the factory default
settings.
LCD-K40.indd 43
DEALER MODE
VOLUME LOCK OFF
TUNING LOCK OFF
START MODE
OFF
OFF
OSD
NORMAL
RC
AC POWER MODE STAND
START VOLUME LEVEL OFF
MUSIC MODE SETUP
RESET
: SELECT : BACK
: ADJUST
MUSIC MODE SETUP
MUSIC MODE POS1 1
MUSIC MODE POS2 255
MUSIC MODE POS3
255
255
MUSIC MODE POS4
MUSIC MODE POS5 255
: SELECT
: ADJUST : BACK
: EXIT
: EXIT
43
1/21/2010 10:47:31 AM