Table of Contents
Advertisement
1
Press MENU button and the main menu will appear.
Press POINT ◄► buttons to select SETUP.
2
Press POINT ▼ buttons to enter into SETUP menu.
3
Press POINT ▲▼ buttons to select the item desired.
4
Press POINT ◄► buttons to enter the item selected.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 36) to exit menu operation.
Note:
For the details, please refer to "SETUP" on pages 37-38.
PC ADJUST
This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received
PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN"
on page 47.)
Press POINT ◄► buttons to enter PC SCREEN menu. It can
be select "AUTO ADJUST", "H-POSITION", "V-POSITION",
"PHASE", "CLOCK" or "AUTO SHUT DOWN" to adjust.
AUTO ADJUST
Press POINT ◄► buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance.
If the image is not displayed properly, a manual adjustment is
required (Refer to following adjustments).
H-POSITION
The horizontal picture position will be moved to the left side by
pressing POINT ◄ button. And it will be moved to the right side by
pressing POINT ► button. (0~100)
V-POSITION
The vertical picture position will be moved down side by pressing
POINT ◄ button. And it will be moved up side by pressing POINT
► button. (0~100)
PHASE
Eliminate disorder from the image. Press POINT ◄► buttons to
adjust PHASE. (0~100)
CLOCK
Eliminate flicker from the image. Press POINT ◄► buttons to
adjust CLOCK. (0~100)
AUTO SHUT DOWN
Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF.
When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds,
TV will be automatically switched to Backlight off mode.
During Backlight Off Mode within 10 minutes, TV will be switched
to On Mode if PC is switched On.
After Backlight Mode continues for 10 minutes, it will be switched
to Standby Mode. During Standby mode, TV will not be switched
to On mode even if PC is switched On.
To switch on TV, press Power button on Remote Control or TV.
Note:
This function is for PC mode (full screen) only. It is not applicable
for PIP/POP dual pictures.
LCD-K40.indd 41
MENU OPERATION (PC mode)
SETUP
SETUP MENU
SETUP
CHILD LOCK
ON
ECO
SENSOR
DYNAMIC AI
ON
ACTIVE CONTRAST
ON
GAME MODE
OFF
GAME INPUT SEL
HDMI1
HDMI LINK
PC ADJUST
SHOP MODE
:
SELECT
:
:
BACK
:
EXIT
ADJUST
SETUP
ON
CHILD LOCK
ECO
SENSOR
DYNAMIC AI
ON
ACTIVE CONTRAST
ON
GAME MODE
OFF
GAME INPUT SEL
HDMI1
HDMI LINK
PC ADJUST
SHOP MODE
:
:
:
SELECT
ADJUST
:
BACK
EXIT
SETUP
PC ADJUST
AUTO ADJUST
H - POSITION
V - POSITION
PHASE
CLOCK
AUTO SHUT DOWN
ON
:
SELECT
:
:
BACK
:
EXIT
ADJUST
AUTO ADJUST
1/21/2010 10:47:30 AM
41
Hide quick links:
Advertisement
Table of Contents
