IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ● Using cabinets or stands recommended by the manufacturer of the television. ●...
TO THE OWNER Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
SAFETY INSTRUCTIONS All the safety and operating instructions should be Do not install the LCD TV near the ventilation duct of air-conditioning equipment. read before the product is operated. This LCD TV should be operated only from the type Read all of the instructions given here and retain of power source indicated on the marking label.
TABLE FEATURE AND DESIGN........6 TEXT RED PREPARATION........7 TEXT GREEN PART NAMES AND FUNCTIONS TEXT YELLOW C O N N E C T I N G L C D T V..... . 9 TEXT BLUE INSTALLING STAND MENU OPERATION(TV/AV/HDMI MODE).....31...
● Xacti Link overall sound quality. (see pages 19, 34). The HDMI-CEC function will operate correctly Feature only when the Xacti is connected to a SANYO TV that incorporates the HDMI-CEC function. ● Sports Mode (see page 26) Just by pressing the button, sport mode ●...
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Control Indicators INDICATORS Power Indicator ECO Sensor Timer Indicator Infrared Remote Receiver CARE FOR USING LCD TV Do not bump or scratch the panel surface as this causes flaws on the surface of the ●...
Page 8
PREPARATION (Each button on the control panel has the same function with its counterpart on the SIDE CONTROLS remote control. ) CHANNEL UP/DOWN (▲▼) buttons -Used to Change channels. -Used to select items on On-Screen Menu. VOLUME (+/-) buttons -Used to adjust the volume. -Used to adjust the value of the selected item on On-Screen Menu.
To align the corresponding pilot holes and fix the stand by screws. Screws B for LCD-32K40/A: 4 pcs Screws A for LCD-42K40/A-HD: 2 pcs Screws B for LCD-42K40/A-HD: 4 pcs Note: Screws A are just for LCD-42K40/A-HD.
CONNECTING LCD TV CONNECTING OUTDOOR AERIAL Outdoor Aerial Cable used for connection (This cable is not supplied with this LCD TV.) Aerial Cable ● NOTE: For all aerial circuit problems, please consult your local dealer. Aerial Cable CONNECTING A COMPUTER Cables used for connection (These cables are not NOTE: supplied with this LCD TV.)
CONNECTING LCD TV CONNECTING VIDEO EQUIPMENT Cables used for connection (These cables are not supplied with this LCD TV.) ● Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2 ● Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video) ●...
BEFORE OPERATION OPERATION OF REMOTE CONTROL INPUT button POWER ON/OFF button MUTE button INFO button SPORTS button STEREO/MONO button STILL button ECO button NUMERIC buttons TIMER button MENU button DIGIT button BACK button CHANNEL RECALL button ▲/ /► OK button ▼...
BEFORE OPERATION OPERATION RANGE Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (5m) in front, about 30° to the left or the right, about 15° for up or down. Infrared Remote Receiver REMOTE CONTROL BATTERIES INSTALLATION Insert two size AAA batteries (1.5V)
BEFORE OPERATION ON-SCREEN MENU TV/AV/HDMI MODE MENU LIST Note: ● "CHANNEL" menu doesn't work in AV3(DVD), HDMI mode and PC mode. MAIN MENU (CHANNEL MENU) ● In AV1 and AV2(S-VIDEO) mode, only "COLOUR SYSTEM" in "CHANNEL" menu can be selected. ●...
BEFORE OPERATION ON-SCREEN MENU TV/AV/HDMI MODE MENU LIST Note: ● HDMI4 is only for model LCD-42K40/A-HD. MAIN MENU (CHANNEL MENU) ● "PC ADJUST" is only active in PC mode. CHANNEL AUTO SEARCH SEMI-AUTO SEARCH MANUAL SEARCH COLOUR SYSTEM AUTO SOUND SYSTEM SKIP CHANNEL SWAP SELECT...
BEFORE OPERATION ON-SCREEN MENU PC MODE MENU LIST MAIN MENU (PICTURE MENU) PICTURE PICTURE MODE STANDARD CONTRAST BRIGHTNESS COLOUR TONE NORMAL COLOUR - R COLOUR - G COLOUR - B SELECT ADJUST BACK EXIT PICTURE MENU PICTURE PICTURE PICTURE MODE STANDARD PICTURE MODE STANDARD...
BASIC OPERATION TURNING ON / OFF LCD TV Complete the peripheral connections before turning on LCD SIDE CONTROLS TV. (Please refer to "CONNECTING LCD TV".) Connect LCD TV's AC Power Cord into an AC outlet. Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON.
BASIC OPERATION SELECTING INPUT SOURCE Select mode "TV" , "AV1", "AV2-S", "AV3", "HDMI1", "HDMI2", "HDMI3", "HDMI4", "PC" or "USB" by pressing INPUT button on Remote Control or on Side Controls, you can also press POINT ▲▼ buttons to select different mode. To enter the selected mode, press OK button or POINT ◄► buttons. SIDE CONTROLS INPUT 1.
BASIC OPERATION INFO Press INFO button on Remote Control to display the status of LCD TV. Press again to remove the display. Channel REMOTE CONTROL Colour System AUTO Sound System INFO button MONO Stereo/Mono VOLUME CONTROL To adjust the volume value desired by pressing VOLUME(+/-) REMOTE CONTROL buttons on Remote Control or on Side Control.
BASIC OPERATION SOUND MODE Select sound level by pressing SOUND button on Remote REMOTE CONTROL Control. STANDARD SOUND button Normal sound state preset on LCD TV. NEWS STANDARD Select this mode for talk programs. MUSIC NEWS Select this mode for music programs. PERSONAL MUSIC Select this mode for user to call out the preset sound...
BASIC OPERATION WIDE REMOTE CONTROL Select screen size among "FULL", "ZOOM", "ZOOM[CAPTION- IN]", "NORMAL" and "NATURAL" by pressing WIDE WIDE button button on Remote Control. * This function doesn't work in PIP/POP mode. * This function doesn't work in TV/ AV/ DVD/ HDMI/ PC FULL modes when no signal is input.
BASIC OPERATION SPORTS MODE REMOTE CONTROL Select SPORTS mode "OFF", "FOOTBALL", "WINTER SPORTS", "MARINE SPORTS" and "INDOOR SPORTS" SPORTS by pressing SPORTS button repeatly on Remote Control. button Turn off the sport mode to return to normal picture. FOOTBALL Use to watch football program, golf program or etc. FOOTBALL WINTER SPORTS WINTER SPORTS...
BASIC OPERATION GAME MODE Game mode will reduce time lug of LCD-TV to display picture REMOTE CONTROL from game console. GAME Press GAME button to display OPTION menu. button Press POINT ◄► buttons to select "GAME MODE ON". Press POINT ▲▼ buttons to select GAME INPUT SELECT, then press POINT ◄►...
BASIC OPERATION PIP/POP OPERATION Using PIP/POP function, you can enjoy a TV program and an REMOTE CONTROL image such as HDMI input from a side terminal at the same time. POP button Only the sound on the main picture is heard from the TV P-SWAP speaker or the headphone jack.
Page 25
BASIC OPERATION POP ON/OFF Press POP button to display two pictures. The left picture is main picture, the right one is sub picture. During POP mode, press P-SWAP button to switch main and sub picture. The sound on the main picture and the sub picture also changes at the same time. Each time POP button is pressed, the location of sub picture is changed as follows.
The HDMI-CEC function will operate correctly only when the Xacti whose model is VPC-HD1010, VPC-HD2000, VPC-FH1, VPC-TH1 or VPC-WH1 is connected to a SANYO TV that incorporates the HDMI-CEC function. REMOTE CONTROL Select HDMI SETTING in SETUP menu.
Page 27
BASIC OPERATION After Flash disk, Mobile Hard Disk or other USB devices are inserted the USB terminal, you can read photos. The USB system only supports JPEG format. Note: ● Do not pull in/out USB device frequently. If you pull out USB device when it is being played, maybe it would result physical deterioration for USB device or LCD TV.
Page 28
BASIC OPERATION OPERATION OF REMOTE CONTROL (IN TEXT MODE) MUTE button POWER ON/OFF button TEXT REVEAL button TEXT HOLD button TEXT CANCEL button NUMERIC buttons TEXT INDEX button TEXT SUBCODE button TEXT SIZE button ▲ VOLUME ( ) button PAGE UP ( ) button ▼...
BASIC OPERATION TEXT/ TV Press TXT/TV button to select teletext. Press this button again will display: ■ TV mode: TV -> TEXT mode -> MIX mode -> TV ■ AV mode: AV -> TEXT mode -> MIX mode -> AV Note: ■...
BASIC OPERATION TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. Press TEXT SIZE button again to enlarge the bottom half of the text page. Press TEXT SIZE button again to return to the normal size page. Normal ->...
MENU OPERATION (TV/AV/HDMI mode) CHANNEL Press MENU button and the main menu will appear. Whenever CHANNEL MENU MAIN MENU is accessed initially, CHANNEL will be the default selection. Press POINT ▼ button to enter into CHANNEL menu. CHANNEL AUTO SEARCH Press POINT ▲▼...
MENU OPERATION (TV/AV/HDMI mode) MANUAL SEARCH MANUAL SEARCH MENU Manual search a channel if it cannot be automatically tuned, such as when the signal is poor. MANUAL SEARCH CHANNEL Select channel “15”. SEARCH 55.25 MHZ Enter into CHANNEL menu, press POINT ▲▼ buttons to SELECT ADJUST STORE...
MENU OPERATION (TV/AV/HDMI mode) PICTURE Press MENU button and the main menu will appear. PICTURE MENU Press POINT ◄► buttons to select "PICTURE", and will display PICTURE menu. Press POINT ▼ button to enter into PICTURE menu. PICTURE PICTURE MODE STANDARD Press POINT ▲▼...
MENU OPERATION (TV/AV/HDMI mode) SOUND Press MENU button and the main menu will appear. SOUND MENU Press POINT ◄► buttons to select "SOUND", and will display SOUND menu. Press POINT ▼ buttons to enter into SOUND menu. SOUND STANDARD SOUND MODE Press POINT ▲▼...
MENU OPERATION (TV/AV/HDMI mode) TIMER TIMER MENU Press MENU button and the main menu will appear. Press POINT ◄► buttons to select TIMER. Press POINT ▼ buttons to enter into TIMER menu. TIMER Press POINT ▲▼ buttons to select the item desired. OFF TIMER ON TIMER - - : - -...
Page 36
MENU OPERATION (TV/AV/HDMI mode) OSD MENU Press MENU button and the main menu will appear. Press POINT ◄► buttons to select OSD. Press POINT ▼ buttons to enter into OSD menu. Press POINT ▲▼ buttons to select the item desired. LANGUAGE ENGLISH H - POSITION...
MENU OPERATION (TV/AV/HDMI mode) SETUP Press MENU button and the main menu will appear. SETUP MENU Press POINT ◄► buttons to select SETUP. Press POINT ▼ buttons to enter into SETUP menu. SETUP Press POINT ▲▼ buttons to select the item desired. CHILD LOCK SENSOR DYNAMIC AI...
MENU OPERATION (TV/AV/HDMI mode) HDMI LINK XACTI LINK: Press POINT ◄► buttons to open link connection SETUP for Xacti. CHILD LOCK SENSOR DYNAMIC AI XACTI POWER ON: Press POINT ◄► buttons to select "ON", ACTIVE CONTRAST The TV will turn on, but the Xacti will keep GAME MODE GAME INPUT SELECT HDMI1...
MENU OPERATION (PC mode) PICTURE Press MENU button and the main menu will appear. PICTURE MENU Press POINT ◄► buttons to select "PICTURE", and will display PICTURE menu. Press POINT ▼ button to enter into PICTURE menu. PICTURE PICTURE MODE STANDARD Press POINT ▲▼...
MENU OPERATION (PC mode) SOUND Press MENU button and the main menu will appear. SOUND MENU Press POINT ◄► buttons to select "SOUND", and will display SOUND menu. Press POINT ▼ buttons to enter into SOUND menu. SOUND SOUND MODE STANDARD Press POINT ▲▼...
MENU OPERATION (PC mode) SETUP Press MENU button and the main menu will appear. SETUP MENU Press POINT ◄► buttons to select SETUP. Press POINT ▼ buttons to enter into SETUP menu. SETUP Press POINT ▲▼ buttons to select the item desired. CHILD LOCK SENSOR Press POINT ◄►...
DEALER MODE DEALER MODE TO DISPLAY DEALER MODE: Press INFO button on remote control while holding MENU button on Side control to display Dealer mode menu. The Dealer Mode has 9 different modes: VOLUME LOCK, REMOTE CONTROL TUNING LOCK, START MODE, OSD, RC, AC POWER MODE, START VOLUME LEVEL, MUSIC MODE SETUP and RESET.
DEALER MODE AC POWER MODE You can set "STAND", "ON" or "LAST" in AC POWER MODE. Use this feature to set TV condition when AC cord plug-in. ● STAND - When AC cord plug-in, LCD TV always STAND-BY. ● ON - When AC cord plug-in, LCD TV always ON.
APPENDIX CLEANING LCD TV Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV. Clean your LCD TV as follows: ● Gently wipe the screen and cabinet with dry soft cloth. ● The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper.
APPENDIX TROUBLE SHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV" . 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3.
APPENDIX CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. Red Input No Connect Pin Configuration Green Input...
Page 48
APPENDIX When input signal is digital from DVD terminal, refer to the chart below. When input signal is digital from HDMI terminal, refer to the chart below. Frame Resolution Frequency EIA1920×1080i@60 33.750 60.00H 67.500 60.00H EIA1920×1080p@60 28.125 50.00H EIA1920×1080i@50 EIA1920×1080p@50 56.250 50.00H EIA1280×720p@60...
APPENDIX UNINSTALLING STAND BASE CAUTION IN UNINSTALLING STAND BASE ● Through in uninstalling work, handling with more than two people is recommended. ● When holding (moving or lifting) the LCD Display, hold the display's body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage.
Page 50
APPENDIX Uninstalling Stand Base Note: For model LCD-42K40/A-HD, release screw in 6 holes with screw driver. Pull the stand base out from the cabinet after all screws already removed. LCD-K40.indd 50 1/21/2010 10:47:40 AM...
Uninstalling Stand Base Cover the holes where you remove the stand base from the dust etc. by paste the deck label (supplied) to these holes. 1pcs (Model LCD-32K40/A) 1pcs (Model LCD-42K40/A-HD) Uninstalling the stand base is completed now. LCD-K40.indd 51...
Page 52
Part No. 1AA6P1P5823-- N7TK ( UE6-A ) SANYO Electric Co., Ltd. LCD-K40.indd 52 1/21/2010 10:47:44 AM...