Dealer Mode - Sanyo LCD-32CA8Z Owner's Manual

The Dealer Mode has 5 different modes : Volume Lock, Tuning Lock, Start Select, Child Lock and Reset.
Volume Lock
This function is used to limit the maximal volume.
Tuning Lock
The way to prevent owner from executing the Tuning function.
Start Select
Select the boot-strap mode desired by this function. You can choose
"OFF", "TV", "AV1", "AV2(DVD)", "HDMI" or "PC".
Child Lock
To lock the buttons except for ON/STAND-BY button on the Side
Controls. When select "ON", only the buttons on the remote controls
can be used.
Reset
This function returns all setting values to the factory default settings.
TO DISPLAY DEALER MODE:
Press and hold Menu button on Side Controls, and then press
RECALL/COLOUR SYSTEM button on remote controls to display
Dealer mode menu.
Take the way of setting VOLUME LOCK for example:
1
Press VOLUME(+/-) buttons to select a maximal volume.
2
Press and hold Menu button on Side Controls, and press
RECALL button on remote controls to display Dealer mode
menu.
3
VOLUME LOCK will be the default selection. (When you adjust
others, press CHANNEL UP/DOWN (▲▼) buttons to select the
item desired.)
4
Press VOLUME(+/-) buttons to select "ON". (The maximal
volume is the set value by step 1.)
5
Press menu button to exit menu operation.

DEALER MODE

MENU OPERATION
REMOTE CONTROLS
SIDE CONTROLS
MENU button
DEALER MODE MENU
DEALER MODE
Volume Lock
◄ Off ►
Tuning Lock
◄ Off ►
Start Select ◄ AV1 ►
Child Lock ◄ Off ►
Reset >>>
▲
Select Adjust
◄►
▼
Press CHANNEL
UP/DOWN/LEFT/
RIGHT(▲▼◄►)
buttons
RECALL/COLOUR
SYSTEM button
Exit
MENU