Dealer Mode - Sanyo LCD-32CA9S Owner's Manual

MENU OPERATION
The Dealer Mode has 7 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC,
RESET and AC POWER MODE.
VOLUME LOCK
This function is used to limit the maximal volume.
TUNING LOCK
The way to prevent user from executing the Tuning function.
START MODE
The LCD TV will automatically enter to the setting mode while being
turned on. You can select "OFF", "TV", "AV1-S", "AV2-DVD", "PC",
"HDMI 1" or "HDMI 2" in START MODE. When it is set "OFF", it will
keep the mode before being turning off.
OSD
When it is set "OFF", Corresponding OSD cannot display on the
screen while operating.
RC
When it is set "OFF", the Remote Control will be locked and cannot
be used.
RESET
This function returns all setting values to the factory default
settings.
AC POWER MODE
You can set "STANDBY", "ON" or "LAST" in AC POWER MODE.
When LCD TV is connected to an outlet with AC power cord, it will
enter the status as setting.
TO DISPLAY DEALER MODE:
Press and hold Menu button on Side Controls, and then press
DISPLAY button on remote controls to display Dealer mode menu. Y
Take the way of setting VOLUME LOCK for example:
1
Press POINT
2 Press and hold Menu button on Side Controls, and press
DISPLAY button on remote controls to display Dealer mode
menu.
VOLUME LOCK will be the default selection. (When you adjust
3
others, press POINT
4 Press POINT
volume is the set value by step 1.)
5
Press menu button to exit menu operation.
34

DEALER MODE

buttons to select a maximal volume.
buttons to select the item desired.)
buttons to select "ON". (The maximal
y p )
REMOTE CONTROLS
Press
POINT
buttons
SIDE CONTROLS
MENU button
DEALER MODE MENU
DEALER MODE
VOLUME LOCK
OFF
TUNING LOCK
OFF
START MODE
OFF
ON
OSD
ON
RC
AC POWER MODE ON
RESET
ADJ MENU EXIT
SEL
/
DISPLAY
button