Dealer Mode - Sanyo LCD-32K40TD Instruction Manual

DEALER MODE

TO DISPLAY DEALER MODE:
Press and hold Menu button on Side Control, and then press
INFO button on remote control to display Dealer mode menu.
The Dealer Mode has 11 different modes: VOLUME LOCK,
TUNING LOCK, START MODE, OSD, RC, AC POWER, MUSIC
MODE, NO SIGNAL OFF, PC CONTROL, BAUD RATE and
RESET.
1
Press and hold Menu button on Side Control, and press
INFO button on remote control to display Dealer mode
menu.
2
Press ▲, ▼, ◄ or ► button to navigate through the options
and adjust the options.
3
Press menu button to exit menu operation.
Option
VOLUME LOCK
TUNING LOCK
START MODE
OSD
RC
AC POWER MODE
42
DEALER MODE
Description
To limit the maximal volume. It's necessary to set up the maximum
volume before VOLUME LOCK ON.
The way to prevent user from executing the Tuning function.
The LCD TV will automatically enter to the setting mode while being
turned on. You can select OFF, DTV, ATV, AV1(AV1-S), AV2(AV2-DVD),
HDMI-1, HDMI-2, HDMI-3, PC in START MODE. When it is set "OFF", it
will keep the mode before being turning off.
When it is set OFF, corresponding OSD cannot display on the screen
while operating.
You can set "NORMAL", "PROHIBIT" or "SEPARATE" in RC MODE.
Use this feature to set Remote Control mode including Power ON/OFF
function.
NORMAL
● Set Remote Control to normal function.
PROHIBIT
● When RC is disabled, only Side-panel button can be used.
SEPARATE
● POWER button still can be functioned to Power ON/OFF.
● FAV ▼ button to Power OFF in all modes including Teletext mode.
● FAV ▲ button to Power ON in all mode including Teletext mode.
You can set "STAND", "LAST" or "ON" in AC POWER MODE.
Use this feature to set TV condition when AC power cord is plug-in.
ON
● When AC power cord is plug-in, LCD TV is always ON.
STANDBY
● When AC power cord is plug-in, LCD TV is always STAND-BY.
LAST
● When AC power cord is plug-in, the LCD TV will be operated
depending on last TV condition. (ON or Stand-by)
STANDBY
9600bps