Setting Braking Rate - Genie GCL-GH Installation Manual

Setting Braking Rate

1) If operator is in RUN mode, press CAL/RUN
2) Press Scroll until display reads "BRAKING RATE >#." where # is the
deceleration rate, ranging from 0 to 9.
0 = MAX braking, 9 = MIN braking. Figure 6.
3) Press SET/CLEAR SET key to toggle between 0 and 9—one digit at a time.
CLEAR
4) Pick a value and operate the door. Adjust as necessary.
5) Press a SCROLL key to shift to a new function and lock in the setting.
SCROLL
6) Press CAL/RUN to return to run mode.
CAL
RUN
GCL-GH
Heavy Duty Operator
CAL to enter calibration mode.
RUN
www.geniecompany.com
OPEN
BRAKING RATE 0
CLOSE
STOP
CAL SET
SCROLL
RUN CLEAR
SCROLL
Figure 6
06-12
6.3