Installing Flush Against A Wall Or Hard Ceiling - Polycom SpectraLink 6000 System Installation Manual
Outdoor base station
Hide thumbs
Also See for SpectraLink 6000 System:
- Owner's manual (74 pages) ,
- Maintenance and diagnostics (58 pages) ,
- Facility preparation (41 pages)
Table of Contents
Advertisement
Installing Flush Against a Wall
or Hard Ceiling
Items provided:
Items needed:
1. Mark and drill four holes into the wall or ceiling, using the
mounting flanges of the outdoor enclosure as a guide.
2. Mount outdoor enclosure to wall or ceiling using anchor bolts.
The outdoor enclosure can be mounted with the compression
fitting in any direction.
3. Slide the Base Station cable through the compression fitting
and tighten fitting.
6
Outdoor enclosure, Base Station
4 anchor bolts (length and type depends on
wall or ceiling material Base Station is being
mounted to)
Compression
fitting
1
1725-36127-001-F.doc
Advertisement
Table of Contents
Need help?
Do you have a question about the SpectraLink 6000 System and is the answer not in the manual?