Setting A Disc To Protect - Toshiba D-V610KU Owner's Manual

E© NG D SCS
Orlgln_l
To prevent the accidental editing, or erasing of the titles,
you can protect them in "Edit" menu.
You can cancel the title protection feature after it is
applied. 2
TOSHIBA
SE-R0295
[] [] [] [] []
3
4
Follow the steps 1 to 3 in "Putting
Names on Titles" on page 75 to
display "Edit" menu.
Use [ii / V] to select "Protect", then
press [ENTER]•
• If the title is protected, _icon will appear in
the original list.
Confirm the indication
"OFF _ ON". Press [ENTER] again•
• If the title is already protected, "ON m OFF" will
appear. If you press [ENTER], the title will be
released from protection.
• _ icon will appear on the title in the original
list.
Press [RETURN] and then [RETURN] or
[STOP II] to exit.
Data will be written onto the disc momentarily.
To protect a whole disc
(VR mode DVD-RW, DVD+RW/+R
only):
Select "Disc Protect OFF _ ON" from the DVD
Menu, then select "Yes".
Refer to "SETTING A DISC TO PROTECT" on
page 29.
EN
83
÷,,,_
©
x_
@
8
r;
@
@
£
©
@
w_
©
U%
£
@
E9KGAUD D-VR610KU EN,indd 83 ,t/_+_,'/lx 2007/12/18 17:11:19