Main Menu - Toshiba D-V610KU Owner's Manual

3* 4
5
6 7
1. I/O ON/STANDBY button (DVD/VCR)
Press to turn on and offthe unit.
2. Cassette compartment (VCR)
Insert a cassette tape here.
3._ OPEN/CLOSE button (DVD)*
Press to open or close the disc tray.
4. Disc tray (DVD)
Place a disc when it is open.
5. VIDEO input jack (L2) (DVD/VCR)
Use to connect external device with an RCA video cable.
6. AUDIO input jacks (L2) (DVD/VCR)
Use to connect external device with an RCA audio cable.
7. DV input jack (L3) (DVD/VCR)
Use to connect the DV output of external device with a DV cable,
8.0 REC button (DVD)
Press once to start a recording.
Press repeatedly to start the one-touch timer recording,
9.1_ PLAY button (DVD) *
Press to start or resume playback.
10.11 STOP button (DVD)
Press to stop playback or recording,
Press to stop the proceeding timer recording in DVD.
11. VCRIDVD indicator
Lights up when the VCR/DVD output mode is selected,
12. VCRIDVD button (DVDIVCR)
Press to select the component you wish to operate,
13. DUBBING button (DVDIVCR)
Press to start VCR to DVD (DVD to VCR) duplication which
you set in the main menu.
(_) The unit can also be
turned on by pressing
these buttons or by
inserting a cassette tape.
14.TRACKING V / A buttons (VCR)
Press to adjust the tracking during playback or in slow
motion of the cassette tape.
While playback is in still mode, you can stabilize the picture.
15. Display
Refer to "FRONT PANEL DISPLAY GUIDE" on page 18.
16. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you can
control the unit from a distance,
17.0 REC button (VCR)
Press once to start a recording, Press repeatedly to start the
one-touch timer recording,
18.1_ PLAY button (VCR)
Press to start playback.
19._ EJECT 111 STOP button (VCR)
_ EJECT button
When the unit is in stop mode, press to remove the cassette
tape from the cassette compartment.
11 STOP button
Press to stop cassette tape playback or recording.
Press to stop the proceeding timer recording in VCR.
20.1_1_ FWD button (VCR)
Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward search).
21 ._1_1 REW button (VCR)
Press to rewind the cassette tape, or to view the picture
rapidly in reverse during playback (rewind search).
1 2
©
_s
e
r;
@
@
@
©
Z
Q
Z
5
_2
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2. HDMI OUT jack (DVD only)
Use an HDMI cable to connect to a display with an HDMI
compatible port.
3. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
4. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
5. VIDEO IN jack (L1) (DVD/VCR)
Use to connect external device with an RCA video cable.
6. AUDIO IN jacks (L1) (DVD/VCR)
Use to connect external device with an RCA audio cable.
7. S-VIDEO IN jack (L1) (DVD/VCR)
Use to connect the S-video output of external device with an
S-video cable.
11 109 8 7654 3
8.COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video inputs
with a component video cable.
9. S-VIDEO OUT jack (DVD only)
Use to connect the S-video input ofa TV monitor, AV receiver
or other device with an S-video cable.
10.AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
11. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder or
other device with a coaxial digital input jack with a digital
coaxial cable.
EN 11
E
Z
@
c4
@
s
S_
@
E9KGAUD D-VR610KU EN.indd 11 ,',_+_,'/h_ 2007/12/18 17:09:38