Setting A Disc To Protect; Finalising Discs - Toshiba DVR20KB Owner's Manual

E9TK4BD_EN.book Page 42 Wednesday, January 6, 2010 10:05 PM

Setting a Disc to Protect

VR
DVD-RW DVD-RW DVD-RW DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
To prevent accidental over-recording, editing or erasing of
recordings, you can protect them using "Setup" menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K L], then press
[ENTER OK].
3
Select "Disc Protect OFF
then press [ENTER OK].
4
Select "Yes" using [K L], then press
[ENTER OK].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a disc
recorded in VR or +VR mode is inserted.
• You can select only "Disc Protect ON
protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON OFF" at step
• If you insert a disc protected with this unit, "Disc Protect
ON OFF" will appear instead of "OFF

Finalising Discs

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
Insert a recordable disc before finalising.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K L], then press
[ENTER OK].
3
Select "Finalise" using [K L], then press
[ENTER OK].
4
Select "Yes" using [K L], then press
[ENTER OK].
Finalise disc?
Yes
No
Finalising will start.
42
EN
To cancel finalising (DVD-RW disc only):
At step
then press [ENTER OK]. Finalising is cancelled and the
unit switches to stop mode.
If "
ON" using [K L],
cancel finalising because the finalising has already
reached at a critical point in its process.
If "No" is selected and [ENTER OK] or [RETURN/BACK]
is pressed, finalising is continued.
You cannot cancel finalising a DVD-R and DVD+RW/+R
disc once it has started.
5
Finalising is complete.
Note
• Finalising a disc in video mode and +VR mode automatically
OFF" when a
creates a Title menu.
• After you finalise the DVD+RW disc, you can call up the title
list by pressing [TOP MENU], or you can call up the Title
3
, then select "Yes".
menu by pressing [DISC MENU].
• Even after DVD+RW disc is finalised, you can still record or
ON".
edit. After you finalise DVD-RW/-R or DVD+R disc, you
cannot edit or record anything else on that disc.
• To release the finalisation of the disc, select "Undo Finalise"
at step
• To release the finalisation of the DVD+RW disc, make an
additional recording to the disc.
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R • For DVD+RW disc, if you have added or deleted chapters, or
made chapters hidden, you must finalise the disc before
being able to see those effects on other units. To play back
discs other than DVD+RW disc in other DVD players, you will
need to finalise.
• If you insert a DVD-RW disc finalised with this unit,
"Undo Finalise" will appear instead of "Finalise".
• DO NOT power off during finalising. This may result in a
malfunction.
Auto Finalise
DVD-RW DVD-RW DVD-RW
You can finalise discs automatically when the disc space runs
out if you set this in "Setup" menu.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Auto Finalise" using [K L], then press
[ENTER OK].
4
Select "ON" using [K L], then press
[ENTER OK].
5
Press [SETUP] to exit.
Note
• Auto finalise function is not available for discs formatted in
VR mode or a DVD+RW disc.
4
, press [STOP C]. Select "Yes" using [K L],
Do you want to cancel?
Yes
No
Finalising
" appears when [STOP C] is pressed, you cannot
3
.
Video
DVD-R DVD-R DVD-R DVD+R DVD+R DVD+R
Auto Finalise
ON
OFF
10%