Setting A Disc To Protect; Finalising Discs - Toshiba DVR80KF Owner's Manual

E9TK5FD_EN.book Page 42 Wednesday, January 13, 2010 10:33 AM

Setting a Disc to Protect

VR
DVD-RW DVD-RW DVD-RW DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
To prevent accidental over-recording, editing or erasing of
recordings, you can protect them using "Setup" menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K L], then press
[ENTER OK].
3
Select "Disc Protect OFF
then press [ENTER OK].
4
Select "Yes" using [K L], then press
[ENTER OK].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a disc
recorded in VR or +VR mode is inserted.
• You can select only "Disc Protect ON
protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON OFF" at step
• If you insert a disc protected with this unit, "Disc Protect
ON OFF" will appear instead of "OFF

Finalising Discs

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
Insert a recordable disc before finalising.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K L], then press
[ENTER OK].
3
Select "Finalise" using [K L], then press
[ENTER OK].
4
Select "Yes" using [K L], then press
[ENTER OK].
Finalise disc?
Yes
No
Finalising will start.
42
EN
To cancel finalising (DVD-RW disc only):
At step
then press [ENTER OK]. Finalising is cancelled and the
unit switches to stop mode.
If "
ON" using [K L],
cancel finalising because the finalising has already
reached at a critical point in its process.
If "No" is selected and [ENTER OK] or [RETURN] is
pressed, finalising is continued.
You cannot cancel finalising a DVD-R and DVD+RW/+R
disc once it has started.
5
Finalising is complete.
Note
• Finalising a disc in video mode and +VR mode automatically
OFF" when a
creates a Title menu.
• After you finalise the DVD+RW disc, you can call up the title
list by pressing [TOP MENU], or you can call up the Title
3 menu by pressing [DISC MENU].
, then select "Yes".
• Even after DVD+RW disc is finalised, you can still record or
edit. After you finalise DVD-RW/-R or DVD+R disc, you
ON".
cannot edit or record anything else on that disc.
• To release the finalisation of the disc, select "Undo Finalise"
at step
• To release the finalisation of the DVD+RW disc, make an
additional recording to the disc.
• For DVD+RW disc, if you have added or deleted chapters, or
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
made chapters hidden, you must finalise the disc before
being able to see those effects on other units. To play back
discs other than DVD+RW disc in other DVD players, you will
need to finalise.
• If you insert a DVD-RW disc finalised with this unit,
"Undo Finalise" will appear instead of "Finalise".
• DO NOT power off during finalising. This may result in a
malfunction.
Auto Finalise
DVD-RW DVD-RW DVD-RW
You can finalise discs automatically when the disc space runs
out if you set this in "Setup" menu.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Auto Finalise" using [K L], then press
[ENTER OK].
4
Select "ON" using [K L], then press
[ENTER OK].
5
Press [SETUP] to exit.
Note
• Auto finalise function is not available for discs formatted in
VR mode or a DVD+RW disc.
4
, press [STOP C]. Select "Yes" using [K L],
Do you want to cancel?
Yes
No
Finalising
" appears when [STOP C] is pressed, you cannot
3
.
Video
DVD-R DVD-R DVD-R DVD+R DVD+R DVD+R
Auto Finalise
ON
OFF
10%