Toshiba D-V610KU Owner's Manual page 39

3
4
5
6
'IIIIIi M ER RECORD N6
Use [A / V] to enter the date, then
press [1_].
Use [A / V] to select a recording
mode•
JAN/01
MON-FRI
JAN/31
When pressing [T] at
Jthe current date, the
_date will change
as
|follows.
e.g.) January 1st
Use [A/V / _I / I_] or [the Number
buttons] to enter the start and end
time, then press [1_].
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Auto recording mode select...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
• You cannot make a program whose recording
time exceeds 12 hours.
Use [A / V] to select an appropriate
external input (LI/L2) to which your
external tuner is connected, then
press [1_].
Use [A /V] to select a recording media
("DVD" or "VCR"), then press [1_].
8
9
Press [ENTER] when all items are
entered•
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 40.
Press [TIMER SET] to set a timer
programming•
will appear on the front panel display, while this
unit waits to make the recording.
J ° 1
i U'U U DVD
"VCR" will appear on the front panel display ifVCR
timer recording have been set.
EN 39
E
©
_s
@
r;
@
2
D
©
%_,_
@
E9KGAUD D-VR610KU EN.indd 39 ,',_+_,/_b 2007/12/18 17:10:13