Setting A Disc To Protect - Toshiba RDXV49DTKF Owner's Manual

E3TK0FD_EN.book Page 45 Monday, March 9, 2009 10:00 AM

Setting a Disc to Protect

VR
DVD-RW DVD-RW DVD-RW
To prevent accidental over-recording, editing or erasing of
recordings, you can protect them using "Setup" menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2 Select "DVD Menu" using [K \ L], then press
[ENTER\OK].
3
Select "Disc Protect OFF A ON" using [K \ L],
then press [ENTER\OK].
4 Select "Yes" using [K \ L], then press
[ENTER\OK].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a disc
recorded in VR or +VR mode is inserted.
• You can select only "Disc Protect ON A OFF" when a
protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON A OFF" at step
• If you insert a disc protected with this unit, "Disc Protect
ON A OFF" will appear instead of "OFF A ON".
Finalising Discs
Video
DVD-RW DVD-RW DVD-RW
You will need to finalise discs to play them back in other units.
Finalising may take from several minutes up to an hour.
A shorter recording period on the disc will require a longer
time period for finalisation. Do not unplug the mains cable
during finalisation.
Insert a recordable disc before finalising.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K \ L], then press
[ENTER\OK].
3
Select "Finalise" using [K \ L], then press
[ENTER\OK].
4 Select "Yes" using [K \ L], then press
[ENTER\OK].
Finalising will start.
Downloaded From Disc-Player.com Toshiba Manuals
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
3
, then select "Yes".
VR
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW
Finalise disc?
Yes
No
To cancel finalising (DVD-RW disc only):
, press [STOP C]. Select "Yes" using [K \ L],
4
At step
then press [ENTER\OK]. Finalising is cancelled and the
unit switches to stop mode.
Do you want to cancel?
Finalising
If " " appears when [STOP C] is pressed, you cannot
cancel finalising because the finalising has already
reached at a critical point in its process.
If "No" is selected and [ENTER\OK] or [RETURN] is
pressed, finalising is continued.
You cannot cancel finalising a DVD-R and DVD+RW/+R
disc once it has started.
5
Finalising is complete.
Note
• Finalising a disc in video mode and +VR mode automatically
creates a Title menu.
• After you finalise the DVD+RW disc, you can call up the title
list by pressing [TOP MENU], or you can call up the Title
menu by pressing [DISC MENU].
• Even after DVD+RW disc is finalised, you can still record or
edit. After you finalise DVD-RW/-R or DVD+R disc, you
cannot edit or record anything else on that disc.
• To release the finalisation of the disc, select "Undo Finalise"
3
at step .
• To release the finalisation of the DVD+RW disc, make an
additional recording to the disc.
• For DVD+RW disc, if you have added or deleted chapters, or
DVD+R DVD+R DVD+R
made chapters hidden, you must finalise the disc before
being able to see those effects on other units. To play back
discs other than DVD+RW disc in other DVD players, you will
need to finalise.
• If you insert a DVD-RW disc finalised with this unit,
"Undo Finalise" will appear instead of "Finalise".
• DO NOT power off during finalising. This may result in a
malfunction.
Auto Finalise
Video
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
You can finalise discs automatically when the disc space runs
out if you set this in "Setup" menu.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K \ L], then press [ENTER\OK].
2
Select "Recording" using [K \ L], then press
[ENTER\OK].
3
Select "Auto Finalise" using [K \ L], then press
[ENTER\OK].
4
Select "ON" using [K \ L], then press
[ENTER\OK].
Auto Finalise
ON
OFF
5
Press [SETUP] to exit.
Note
• Auto finalise function is not available for discs formatted in
VR mode or a DVD+RW disc.
Yes
No
10%
DVD+R DVD+R DVD+R
45
EN