Toshiba D-V610KU Owner's Manual page 42

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 20.
1
2
Press [SAT. LINK]•
Use [A / V] to select the time, media
and recording mode, then press
[ENTER]•
[] [] [3 [] []
TOSHIBA
SE-R0295
3
4
Use [A / V] or [the Number buttons]
to set the desired starting time, then
press [1_].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in this step to set the
desired minutes.
• If you wish to go back to the left, press [_ql].
Use [A / V] to select a recording
media ("DVD" or "VCR"), then
press
[_-].
Use [A / V] to select the recording
mode•
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
42 EN
E9KGAUD D-VR610KU EN.indd 42 ,F_+_,,/.hx 2007/12/18 17:10:16