Advertisement
#171. PhillipsHeadScrewdriver
#170.Short PhillipsHeadScrewdriver
#187.12/14mm Wrench
#169.13/14mm Wrench
ASSEM
LYINSTRUCTIONS
PRE-AS
1.
Using a razor knife (Box Cutter) cut the outside, bottom,
edge of box along
the dotted
Line. Lift Box over the unit and unpack.
2.
Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged
parts are found, or parts are missing, contact your dealer
immediately.
3.
Locate the hardware
package. Remove the tools first. Remove the hardware
for each step as needed to avoid confusion.
The numbers
in the instructions
that are in parenthesis
(#) are the item number from the assembly drawing
for reference.
7
E98 ELLIPTICAL
Advertisement
