Specifications - Snapper LT-200 Series Operator's Manual

LT-200 Series Hydro Tractors and Mower Decks
Note: Specifications are correct at time of printing and are subject to change without notice.
Specifications
20 hp* Description
Engine
Make / Model
Horsepower
Displacement
Electrical System
Oil Capacity
Oil Type
Air Filter
Spark Plug
Spark Plug Gap
Chassis
Fuel Tank Capacity
RearWheels
Front Wheels
Transmission
Type
Hydraulic Fluid
Speeds @3400 rpm
Reverse:0-3.0 MPH (4.6 km/h)
Continuous Torque Output
Drawbar Rating
Maximum Weight on Axle
Briggs & Stratton / Intek
20 @ 3600 rpm
30.5 ci (582 cc)
12 Volt, 9 amp. Alternator, Battery: 230 CCA
64 oz (1.9 L)
See Operator's Manual or Engine Manual
792105
491055
.76mm or 0.030 in.
3.5 gal (13.2 L)
22 x 10 -8 Tire Size: 10 psi (.68 bar) Inflation Pressure
15 x 6 -6 Tire Size: 12-14 psi (.82-.96 bar) Inflation Pressure
Hydrostatic Tuff Torq K46
10W30 Premium Engine Oil
Forward: 0-5.5 MPH (9.0 km/h)
170 ft-lb
227 Ib (103 kg)
675 Ib (306 kg)
Dimensions
Overall Length 72 in (183 cm)
OveralWidth 37 in (94 cm)
Weight 532 Ib (241 kg)
with 44 in Mower Deck
* The gross power rating labels for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small
Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05).
Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the
wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not
develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of
factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute
an engine of higher rated power for this Series engine.
Snapper Products
535 Macon Street
IVIcDonough,GA 30253 (800) 935-2967
snapper.com C_