Mowing Recommendations; Specifications - Snapper Z1202B Safety Instructions & Operator's Manual

MOWING RECOMMENDATIONS
1. Keep mower blades sharp.
2. Make sure deck and discharge chute are clean.
A
caution
A
POWER MUST BE OFF TO CLEAN DISCHARGE CHUTE
3. When mowing tall grass, make two passes, mowing off 1/2 of the desired cut on the first pass, and
then the desired height the second pass. Check for hidden dangers first.
4. Go slowly for trimming.
5. Always cut grass with the engine at full throttle speed. This "ENGINE" speed allows the cutting blades
to operate at optimum cutting speed. Control "GROUND" speed with the Joystick.
6. Vary ground speed to suit conditions (i.e.: go slower in tall thick grass, on hills, wet conditions, etc.).
TRACTOR SPECIFICATIONS
Length
Models Z1202B, Z1203B, Z1402K, Z1403K,
Z1802K, Z1803K, Z2002K, Z2003K-71"
Models Z1404K, Z1804K, Z2004K--74"
Width
All Models
46"
Height
Models Z1202B, Z1203B, Z1402K, Z1403K
Z1802K, Z1803K, Z2002K, Z2003K-41"
Models Z1404K, Z1804K, Z2004K- 42"
Weight
All Models- Approx. 6501b.
Fuel Tank
Models Z1202B, Z1203B- Approx. 3 Qt.
Models Z1402K, Z1403K, Z1404K, Z1802K, Z.1803K
Z1804K, Z2002K, Z2003K, Z2004K-Approx. 5 gallons
Hydrostats
Models Z1202B, Z1402K, Z1802K, Z2002K -
Models Z1203K, Z1403K, Z1803K, Z2003K, ■
Z1404K, Z1804K, Z2004K
(2) Sauer/Sundstrand
BDU-10S
(
2
) -Hydro-Gear
BDU-10L
8