Snapper LT-200 Series Operator's Manual page 62

Cutting o fftoomuch atone time shocks theplant's g rowth
system and weakens thegrass plants.
A good rule of thumb
is the 1/3 rule: to cut no more than one third of the grass
height, and never more than 1 inch at a time.
Cut LessThan 1/3
Optimalcutting
point at less than
1/3 from top of
grass blade
Cutting down to this
area contributes to
thatch problems
Tall GrassRequiresIncremental Cutting- For extremely tall
grass, set the cutting height at maximum for the first pass,
and then reset it to the desired height and mow a second or
third time.
Don't cover the grass surface with a heavy layer of clippings.
Cut Here On Cut Here
First Pass On
Second
I_ if, IJ Is/ Pass
When and How Oftento Mow
The time of day and condition of the
grass greatly affect the results you'll
get when mowing. For the best
results, follow these guidelines:
• Mow when the grass is
between 3-4 in. (7.5-10 cm)
high.
• Mow with sharp blades. Short
clippings of grass one inch or
shorter decompose more quickly than longer blades.
Sharp mower blades cut grass cleanly and efficiently,
preventing frayed edgeswhich harm the grass.
• Mow at time of day when the grass is cool and dry.
Late afternoon or early evening often provide these
ideal mowing conditions.
• Avoid mowing after rain or even heavy dew, and never
mulch when the grass is wet (moist grass does not
mulch well, and clumps beneaththe mower deck).
Note:Always operate the engine at furl throttle when
mowing.
Proper Mowing Speed
Engine Speed and Ground
Speed - Always operate the
engine at full throttle when
mowing. If you hear the
engine slowing down, you
are mowing too fast -
maintaining a slower ground
speed will improve the
cutting efficiency of the
blades and prevents many common cutting problems.
Select an appropriate ground speedfor the thickness and
height of the grass you are cutting (3rd gear or slower for
manual gear models, or mid-range or slower for hydro
models). If you hear the engine slowing down you are
mowing too fast, use a slower ground speed.
How MuchGrassto Cut Off - Mow when the grass is 3-4 in.
(7.5-10 cm) long.Do not cut off more than 1 in. (2.5 cm) of
grass in a single pass.
18 snapper.corn