Hands-Free Setting - Mazda 5 Manual

Mazda5_8CN3-EA-12I_Edition1 Page279
Tuesday, September 4 2012 1:24 PM
Call : Calls the registered phonebook
l
data when the talk button is short-
pressed.
Edit : Edits the registered phonebook
l
data when the talk button is short-
pressed.
Delete : Deletes the registered
l
phonebook data when the talk button is
short-pressed.
Previous : Returns to the previous
l
phonebook data in read-out when the
talk button is short-pressed.
6. Prompt: End of list, would you like
to start from the beginning?
7. Say: [Beep] No
qDTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
Form No.8CN3-EA-12I
Black plate (279,1)
Bluetooth® Hands-Free

Hands-Free Setting

qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth
Free.
Refer to Bluetooth® Hands-Free
Preparation on page 6-76.
Registered device read-out
®
Bluetooth Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Pairing options
5. Prompt: Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
6. Say: [Beep] List
7. Prompt: XXXXX..., XXXXX...,
XXXXX... (Ex. Device A, device B,
device C) (The voice guidance reads
out the device tags registered to the
hands-free system.)
Interior Comfort
®
®
Hands-
6-87