Hands-Free Telephone Setting - Mazda 2010 Mazda5 Owner's Manual

Mazda5_8AU7-EA-09H_Edition1 Page226
Wednesday, July 8 2009 11:28 AM
Interior Comfort
Bluetooth Hands-Free

Hands-Free Telephone Setting

qMobile phone
Mobile phone registration
For the registration of a Bluetooth
equipped mobile telephone to Bluetooth
Hands-Free, refer to Bluetooth Hands-
Free preparation (page 6-48).
Registered mobile phone read-out
Bluetooth Hands-Free can read-out the
mobile phones registered to its system.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
"Telephone" or "Phone".
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say cancel to return to main
menu.
4. Say: [Beep] Pairing options
5. Prompt: Do you want to pair a
phone, delete a phone, or list paired
phones?
6. Say: [Beep] List phones
6-58
Form No.8AU7-EA-09H
Black plate (226,1)
7. Prompt: XXXXX..., XXXXX...,
XXXXX... (Ex. Phone A, phone B,
phone C) (The voice guidance reads
out the phone tags registered to the
hands-free system.)
Press the voice recognition/hands-free
switch during the read-out at the desired
phone, and then say one of the following
voice commands to execute it.
Select : Programmed the mobile
l
phone when the voice recognition/
hands-free switch was pressed.
Continue : Continues the voice
l
guidance.
Delete : Deletes the registered mobile
l
phone.
Previous : Returns to the previous
l
mobile phone.
8. Prompt: End of list, would you like
to start from the beginning?
9. Say: [Beep] No
10. Prompt: Returning to main menu.
Mobile phone selection
This function is for switching to a
different mobile phone which has been
registered beforehand. The selected
mobile phone will remain in effect until
the ignition switch is turned off.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
"Telephone" or "Phone".
2. Say: [Beep] Setup