Mazda 5 Manual page 308

Mazda5_8CN3-EA-12I_Edition1 Page308
Tuesday, September 4 2012 1:25 PM
In Case of an Emergency
Flat Tire
qJack
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
counterclockwise.
Jack screw
7-4
Form No.8CN3-EA-12I
To secure the jack
1. Insert the wing bolt into the jack with
2. Turn the jack screw in the direction
3. Turn the wing bolt completely to
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Maintenance
Wing bolt
l
l
l
Black plate (308,1)
the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.
shown in the figure.
Wing bolt
Jack screw
secure the jack.
Always keep the jack clean.
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately lubricated.