Mazda 5 Manual page 270

Mazda5_8CN3-EA-12I_Edition1 Page270
Tuesday, September 4 2012 1:24 PM
Interior Comfort
Bluetooth® Hands-Free
Device programming (Pairing)
®
To use Bluetooth Hands-Free, the device
equipped with Bluetooth
programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth
audio devices can be programmed to one
vehicle.
NOTE
A device can be programmed only when the
l
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
®
If a Bluetooth device has already been
l
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
®
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
l
®
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep] Setup
6-78
Form No.8CN3-EA-12I
®
has to be
®
®
®
application of
Black plate (270,1)
4. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
5. Say: [Beep] Pairing options
6. Prompt: Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
7. Say: [Beep] Pair
8. Prompt: Start the pairing process on
®
your Bluetooth device. Your pairing
code is 0000 (XXXX). Input this code
®
on your Bluetooth device when
prompted on the device. See device
manual for instructions.
9. Using the device, perform a search for
®
the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select Mazda from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: Please say the name of the
device after the beep.
13. Say: [Beep] XXXX - - - (Speak a
device tag , an arbitrary name for
the device.)
Example: Stan's device.
NOTE
Speak a programmed "device tag" within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar "device tag".