Accessory Sockets - Mazda 5 Manual

Mazda5_8CN3-EA-12I_Edition1 Page303
Tuesday, September 4 2012 1:25 PM

Accessory Sockets

Switch the ignition to ACC or ON.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
Front
Rear
Form No.8CN3-EA-12I
Black plate (303,1)
Interior Equipment
CAUTION
Ø To prevent accessory socket
damage or electrical failure, pay
attention to the following:
Ø
Do not use accessories that
require more than 120 W (DC 12
V, 10 A).
Ø
Do not use accessories that are
not genuine Mazda accessories
or the equivalent.
Ø
Close the cover when the
accessory socket is not in use to
prevent foreign objects and
liquids from getting into the
accessory socket.
Ø
Correctly insert the plug into
the accessory socket.
Ø Noise may occur on the audio
playback or TV reception
depending on the device connected
to the accessory socket.
Ø Depending on the device
connected to the accessory socket,
the vehicle's electrical system may
be affected, which could cause the
warning light to illuminate.
Disconnect the connected device
and make sure that the problem is
resolved. If the problem is
resolved, disconnect the device
from the socket and switch the
ignition off. If the problem is not
resolved, consult an Authorized
Mazda Dealer.
NOTE
To prevent discharging of the battery, do not
use the socket for long periods with the engine
off or idling.
Interior Comfort
6-111