Mazda 5 Manual page 260

Mazda5_8CN3-EA-12I_Edition1 Page260
Tuesday, September 4 2012 1:24 PM
Interior Comfort
Bluetooth® Audio
NOTE
®
Some Bluetooth audio devices need a
l
certain amount of time before the "
symbol is displayed.
If a hands-free type mobile phone has been
l
the most recently programmed device, the
®
Bluetooth unit links this device. If you
would like to use a Bluetooth
device which has been previously
programmed to the Bluetooth
must be changed to this device.
If an error occurs while trying to link a
l
device, "Err" flashes in the display for
three seconds, and the display returns to
"LINK CHANGE". If this occurs, check the
programming status of the Bluetooth
audio device and the location of the device
in the vehicle (not in the trunk or a metal-
type box), and then try the link operation
again.
Device selection can also be done using
l
voice recognition (page 6-87).
How to confirm the device currently
linked
Switch to the link-change mode. (Refer to
Changing the link to a Bluetooth
device )
The device name displayed first is the
device which is currently linked.
Deleting the link to a Bluetooth
device
1. Using the audio control dial, select the
pairing delete mode PAIR DELETE
in the BT SETUP mode. (Refer to
®
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the first device among the
programmed devices is displayed.
6-68
Form No.8CN3-EA-12I
4. Rotate the audio control dial and select
the name of the programmed device
"
you would like to delete.
®
audio type
®
unit, the link
®
NOTE
Only the names of programmed devices can be
®
audio
displayed. If only one device is programmed,
only the name for this device is displayed.
5. If a selection other than GO BACK
®
is made and the audio control dial is
audio
pressed, SURE ? NO is displayed.
6. Rotate the audio control dial clockwise
and switch the display to SURE ?
YES .
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
-Clockwise: "SURE ? YES" displayed
-Counterclockwise: "SURE ? NO" displayed
Black plate (260,1)
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7