Mazda 5 Manual page 381

Mazda5_8CN3-EA-12I_Edition1 Page381
Tuesday, September 4 2012 1:25 PM
3. Locate the position of the suspected
fuse by using the chart inside the fuse
block cover.
4. Pull the fuse straight out with the fuse
puller provided on the inside of the
engine compartment fuse block cover.
5. Inspect the fuse and replace it if it's
blown.
Normal
6. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
Form No.8CN3-EA-12I
7. Reinstall the cover and make sure that
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Make sure the ignition is switched off,
2. Remove the fuse block cover.
Blown
Black plate (381,1)
Maintenance and Care
Owner Maintenance
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
it is securely installed.
and other switches are off.
Fuse block
8-51